Periodic Inspection of Fire Protection Equipment
Under Article 12 of the Building Standards Act, a qualified specialist inspects and reports once a year on the operating condition of fire protection equipment—fire doors, fire shutters, and the like—in buildings such as hospitals, hotels, and retail premises. To prevent the spread of fire and smoke and ensure safe evacuation, we inspect equipment that closes or activates automatically in conjunction with detectors and fuses.
Service Overview
Fire protection equipment plays a vital role in limiting the spread of flames and smoke during a fire so that people can evacuate safely. We inspect and verify the condition of four types of equipment that close automatically (normally open type) or activate in conjunction with detectors and fuses when a fire occurs.
Fire Doors
To ensure fire doors close properly in a fire, we check how they open and close, their interlock with detectors and control devices, the movement of the automatic closing mechanism, and any misalignment between door and frame. We also check that nothing has been left obstructing them, and measure the closing force and speed.
Fire Shutters
To ensure fire shutters close safely in a fire, we check how they open and close, their interlock with detectors, the automatic and manual closing devices, and any faults in the power supply and drive components. We also check for deformation and measure the stopping distance and closing speed.
Fire-Resistant Fabric Screens
To ensure fire-resistant fabric screens descend and operate correctly, we check their opening and closing, their interlock with detectors, the operation of the drive components, and the condition of the connections.
Our Process
Contact & Consultation
We will ask about the building's outline, the types and quantities of equipment involved, and the inspection timing.
Review & Application
Once we confirm the types and quantities of fire protection equipment, we will proceed with the contract and schedule the inspection accordingly.
On-Site Inspection
A fire protection equipment inspector examines every item of fire protection equipment on site, checking screens, drencher systems, and other components one by one in detail.
Preparation of the Inspection Report
We prepare a report summarizing the inspection results.
Reporting to the Administrative Agency
We submit the inspection report to the receiving body or the designated administrative agency. Submission methods vary by agency.
Our Strengths
Inspections Carried Out by Qualified Specialists
Qualified fire protection equipment inspectors and first- and second-class registered architects carry out inspections in accordance with the applicable standards.
An Outstanding Track Record in the Kanto Region
We have an extensive record of fire protection equipment inspections in the Kanto region and surrounding areas, where we have built a strong network.
Leave the Dealings with Authorities to Us
We submit the report to the designated administrative agency on your behalf, keeping your dealings with the authorities to a minimum and completing the procedures smoothly.
Total Support, Including Renovation
From inspection to improvement proposals to renovation work, we address the issues that come with a building's age from end to end, with comprehensive support you can rely on.
Frequently Asked Questions
Under Article 12 of the Building Standards Act, reporting is required where this equipment is installed in a building subject to the periodic inspection of designated buildings. The inspection interval is once a year.
This is an inspection system under Article 12, Paragraph 3 of the Building Standards Act, and is separate from inspections under the Fire Service Act. For buildings subject to the periodic inspection of designated buildings, it must be carried out where applicable equipment is present.
Please have ready the as-built drawings and the fire equipment inspection report, along with a copy of the previous report if inspections have been carried out before. Please feel free to contact us for details.
The requirement is set out in Article 12 of the Building Standards Act, and failing to report is a violation of the law. A fine of up to one million yen may be imposed under Article 101 of the Act.
Feel free to consult us about disaster prevention, fire protection, and fire equipment inspection
Our experienced specialists carry out thorough inspections and safeguard your building.
Contact Us